Operating Voltage

12 Volts

Package Dimensions

9.3 x 7.9 x 1.8 inches

Item Weight

1.63 pounds

OBDII Protocol

ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN


480 X 272 TFT

Vehicles' Compatibility

Works on most from 1996 US-based, 2002 EU-based, 2005 Asian-based or newer OBD II & CAN domestic or import vehicles, Note: for AT/ABS/SRS testings, FX2000 scanner ONLY supports cars from 2005 or newer.


English, French, Spanish, German, Russian, Italian, Polish, Portuguese

FX2000 Check Engine ABS SRS TCM Scan Tool

How to Update the FX2000

Why the Scan Tool Doesn't Power Up?
Check if the scan tool's connector is securely connected to the vehicle's DLC; Check if the DLC pins are bent or broken. Clean the DLC pins if necessary; Check vehicle battery to make sure it is still good with at least 8.0 volts.
How to get it start?
Simply plug into the OBD II port on your car and turn ignition on and you ready to go. It does not need any battery or charger, gets the power directly from the OBDII data link connector in your vehicle.
Does this FX2000 scanner diagnose 4 systems for all vehicles?
No, it only works with 2005 and newer OBD2 protocol vehicles for transmission, ABS, and SRS (airbag) systems diagnosis.
Why the Vehicle Linking Error?
Confirm that the ignition is ON, check if the scan tool's connector is securely connected to the vehicle's DLC; Turn the ignition off and wait for about 10 seconds and turn the ignition back to on and continue the testing; Verify the control module is not defective.